Troubleshoot your Keurig not pumping water with this helpful guide. Learn tips & tricks to get your Keurig working again in no time.
Are you having trouble getting your Keurig to pump water? Don’t worry, you’re not alone! This guide will provide you with all the tips and troubleshooting advice you need to get your Keurig back up and running in no time.
So, let’s get started and get that Keurig fixed!
Identifying the Problem
Identifying the problem with your Keurig coffee maker can be the first step to getting it working properly again. Begin by examining the machine for any signs of damage. Check for any loose wiring or parts that may have become disconnected.
This could be a sign of a faulty pump motor or an issue with the electrical connection. Additionally, check for any signs of water leaks or corrosion, which could indicate a faulty water reservoir.
The water reservoir may need to be cleaned or replaced if there is water leakage. To check the water reservoir, start by removing the reservoir from the machine and inspecting it. Make sure that the reservoir is not cracked or otherwise damaged.
If it is cracked, you will need to purchase a replacement. If the reservoir appears to be in good condition, flush it out with warm water and a mild detergent.
Rinse the reservoir thoroughly before reattaching it to the machine.
Cleaning the Needle and Water Line
A blocked needle or water line can be a major cause of your Keurig not working properly. To clean the needle and water line, start by unplugging the machine and removing the water reservoir.
Next, use a can of compressed air to blow out any debris or blockages in the needle and water line. Once the needle and water line have been cleared, reattach the water reservoir and plug the machine back in.
Replacing the Water Filter
If the water filter is clogged or damaged, it may need to be replaced. To replace the water filter, start by unplugging the machine and removing the water reservoir.
Next, locate the water filter, remove it, and replace it with a new one. Then, reattach the water reservoir and plug the machine back in.
Checking the Pump Motor
A faulty pump motor can prevent your Keurig from working properly. To check the pump motor, start by unplugging the machine and removing the water reservoir.
Next, locate the pump motor and inspect it for any signs of damage. If the motor appears to be damaged, you will need to purchase a new one.
Resetting the Keurig
If your Keurig is not working properly, you may need to reset it. To reset the machine, start by unplugging it from the power source.
Then, press and hold the power button for 10 seconds before plugging the machine back in. The machine should now be reset and ready to brew.
Frequently Asked Questions (FAQ)
How do I know if my Keurig is not pumping water?
If your Keurig is not pumping water, you may notice that it is not producing any coffee or hot water. Additionally, you may notice that the water reservoir is not being emptied.
What are some common causes of Keurig not pumping water?
Common causes of a Keurig not pumping water include a clogged dispense needle, a kinked water line, a water filter that needs to be replaced, or a defective pump.
How can I troubleshoot my Keurig to determine why it is not pumping water?
To troubleshoot your Keurig to determine why it is not pumping water, you should first check the water filter, then inspect the water line for any kinks, and then check the dispense needle for any blockages.
If none of these steps solve the problem, you may need to replace the pump.
How can I clean the dispense needle on my Keurig?
To clean the dispense needle on your Keurig, you should first remove the needle cap and the needle guard. Then, use a paperclip or a similar object to remove any blockages from the needle.
Finally, use a cotton swab or pipe cleaner to clean the inside of the needle.
What should I do if my Keurig’s water line is kinked?
If your Keurig’s water line is kinked, you should first check the entire water line for any kinks or bends. If you find any, you should carefully straighten the line to ensure it is no longer kinked.
How often should I replace the water filter in my Keurig?
The water filter in your Keurig should be replaced every two to three months, or when you notice that the water pressure is decreasing.
What should I do if I need to replace the pump in my Keurig?
If you need to replace the pump in your Keurig, you should first unplug the device and then remove the pump. Then, you should purchase a new pump and install it in the machine.
Finally, you should plug the device back in and test to make sure the pump is working correctly.
Final Word
By following the tips and troubleshooting guide in this article, you can easily fix your Keurig not pumping water.
With a few simple steps, you can get your Keurig back up and running in no time. So don’t worry, you can fix your Keurig and enjoy your favorite cup of coffee again!
My name is Michael Jones, and I’m a coffee enthusiast and expert based in the US. I run my own coffee shop, and I’m passionate about everything related to coffee. On my website, Coffee and Comfort, I share my knowledge and tips to help you elevate your coffee experience. Whether you’re a beginner brewer or a seasoned barista, I have something for everyone. I’ll teach you how to choose the right coffee beans, grind them perfectly, and brew a delicious cup of coffee at home. I’ll also share tips on how to make different coffee drinks, like lattes, cappuccinos, and espressos. But more than just teaching you about coffee, I want to help you create a coffee lifestyle that you love. Coffee is more than just a beverage; it’s a way to connect with people and enjoy the simple things in life.